Menu+3+8] Scan Add; S Cnadd; Menu+3+9] Squelch Level A; S Ql A - Leixen UV-52 User Manual

keys to enable or disable Scan Add. If Scan Add is
disabled on a channel, that channel will be skipped
during MR/CH scans. If a channel's Scan Add is
disabled, ▲will be indicated on the transceiver's
display.
b) MR/CH Scan is only available if two or more
channels are programmed with Scan Add enabled.
c) Scan is only effective if the squelch is closed.
．
38

[ MENU+3+8] Scan add

Each memory channel can be set to be blocked from
scan through Menu 38. If Scan Add is disabled on a
channel, that channel will be skipped during MR/CH
scans. A channel's scan status will be indicated on the
transceiver's display.
．
39

[ MENU+3+9] Squelch Level A

The squelch circuit allows you to only hear desired
signals. If a strong enough signal is not present, the
squelch circuit is closed, and you will hear no
background noise. Higher levels of the Squelch level
setting require stronger signals to open the squelch
circuit. Set the squelch level to one appropriate to the
amount of RF noise in your environment. A squelch
setting that is too high may cause you to miss
receiving a weaker signal, while too low a setting may
cause you to hear more noise than you might want.
Set the Squelch Level of channel A using Menu 39.
There are nine levels of squelch setting; the default
level is 2.
（

S CNADD

（

S QL A

）
）