Reverse Frequency R Everse; Reset Menu; All Reset(Allrst); Function Reset(Funres) - Leixen UV-52 User Manual

Reverse Frequency （ R everse ）
The Reverse shortcut enables or disables Reverse
frequency mode.

Reset Menu

All Reset(ALLRST)

All Reset resets the transceiver to all factory settings,
leaving only the DTMF dial list untouched. )
To perform an All Reset, press and holding the Menu
Key, rotate the Power Switch to power on the
transceiver, the screen will display "ALL RST ". Press
the Menu key again and the screen will display
"RESET". Press the Menu Key a third time, and the
screen will display "Wait". When the transceiver
restarts, the reset is complete. Note: You may cancel
the reset by pressing any key other than the "Menu"
key when the "RESET" prompt appears.

Function Reset(FUNRES)

Function Reset will reset the transceiver to factory
default settings, leaving memory channels and the
DTMF list intact.
To perform a Function Reset, press and holding the
Menu Key, rotate the Power Switch to power on the
transceiver, the screen will display "ALL RST ". Press
the ▲ or ▼ keys to select "FUNRST". Press the
Menu key again and the screen will display "RESET".