Current Channel Delete (Chadel) - Leixen UV-52 User Manual

Press the Menu key a third time, and the screen will
display "Wait". When the transceiver restarts, the reset
is complete. Note: You may cancel the reset by
pressing any key other than the "Menu" key when the
"Reset?" prompt appears.

Current Channel Delete (ChaDel)

Current Channel Delete will delete the current channel
of the transceiver.
To perform a ChaDel Reset, press and holding the
Menu Key, rotate the Power Switch to power on the
transceiver, the screen will display "ALL RST ". Press
the ▲ or ▼ keys to select "ChaDel". Press the Menu
key again and the screen will display "RESET". Press
the Menu key a third time, the screen will display next
memory channel. That means the delete is complete.
Note: You may cancel the reset by reboot the
transceiver. MEMRST can't be operated in VFO
mode.