Leixen UV-52 User Manual page 14

▼
EXIT
A/B
*band/Call
# V/M/Scan
2. Numeral 0-9: Press to input frequencies,
channel number, menu number, CT/DCS and
other value.
Numeral
1:SQL
Numeral 2:L/H
Numeral
3:SAVE
Numeral
4:STEP
Numeral
5:REV
Press to down, hold to go fast. When
transmitting a DTMF Code, press this key
to input C.
Press to Exit or switch A/B; hold is a
programmable key. When transmitting a
DTMF Code, press this key to input D.
Press to switch band, hold to start a call.
Press to switch V/M, hold to start SCAN.
Press and hold to Squelch Level, Press
▲/▼
to select 0-9 level, press any key to
confirm and exit.
Press and hold to switch high/low power
Press and hold to Enable/disable Save
function.
Press and hold to set frequency step,
optional: 2K5/5K/6K25/10K/12K5/25K
(Only in VFO mode)
Press and hold to enable/disable Reserve.
The channel should set RPT+/RPT- and
offset advanced. (Only i n MR mode)