Menu+1+2] Fm Scanf M Scan; Menu+1+3]Fm Sqlf M Sql; F M Dw - Leixen UV-52 User Manual

NDCS: Transmit a specified normal DCS code.
IDCS: Transmit a specified inverted DCS code.
Use Menu 11 to set the desired CTCSS or DCS tone,
using the same range as for Menu 09.
12 ． [ MENU+1+2] FM SCAN
The FM Scan function determines whether the "▲▼"
keys scan for active FM channels or simply tune the
radio in 50 KHz tuning steps. Setting FM Scan to ON
will increase tuning speed, as only active FM radio
signals will stop tuning.
．
13 [ MENU+1+3]FM SQL
The FM SQL menu determines the sensitivity of the
FM broadcast scan. The higher this setting, the
stronger a signal must be in order for the scan to stop
on a particular FM broadcast channel. Settings range
from 0 (always on) to 9 (tightest squelch for scan).
The default level is 5.
．
14 [ MENU+1+4]FM Dual reception
The FM Dual Reception feature allows you to
continue listening to an FM broadcast station at the
same time as another signal from the transceiver is
present. If this feature is disabled, a signal from the
main transceiver will not heard when FM broadcast
radio reception. In either case, a signal will interrupt
FM broadcast reception. This feature may be turned
ON or OFF. The default setting is ON.
（ F M SCAN
（
F M SQL
（
）
）
）

F M DW