Ac Power Supply Connection - Supermicro SSE-G3648B Installation Manual

E1031Series switch Installation Guide

AC Power Supply Connection

SSE-G3648B/BR series switches use 220/110VAC power supply by default. Please read the
power input specification for detailed information.
Figure 4-6: Connecting the Power Supply Cable
The AC Power supply connection procedure is described as below:
1. Insert one end of the power cable provided in the accessory kit into the power source
socket, and the other end to the power socket (with overload and leakage protection)
in the switch power supply.
2. Check the power status indicator in the front panel of the switch. The corresponding
PWR indicator should light. The SSE-G3648B/BR self-adjusts to the input voltage.
As soon as the input voltage is in the range printed on the switch surface, the switch
will
3. When the switch is powered on, it executes a self-test procedure and starts up.
Caution! The input voltage must be within the required range, otherwise the switch can be
damaged or malfunction. Do not open the switch shell without permission. It can cause physical
injury.
Disconnect all power supply cords before servicing.
Chapter 3 Device Installation
to the SSE-G3648B/BR Switch
40