Installing The Fan - Supermicro SSE-G3648B Installation Manual

E1031Series switch Installation Guide

Installing the Fan

The SSE-G3648B/BR switch has three fans in its standard configuration.
Figure 4-3: SSE-G3648B/BR Switch Fan Installation
Please install or remove the fan module as follows:
The golden fingers should be positioned inward and on the back of the switch. After
1.
proper insertion you can hear the lock sound of "click".
2. To withdraw a fan, pinch the sheet metal inward – then the fan module can be pulled
out.
Caution! The sheet metal edge of fan is thin, please watch your fingers when you pinch, press,
insert and pull it.
WARNING! - Hazardous moving parts. Keep away from moving fan blades.
Chapter 3 Device Installation
36