Configure Well-Plate Types - Agilent Technologies 1260 Infinity II User Manual

3
Installing the Fraction Collector

Configure Well-plate Types

Configure Well-plate Types

If the plate you are using is not found on the
Closing Mats"
exact dimensions of the plate as marked below and enter the values in the
plate configuration table of the ChemStation or the Agilent Instant Pilot
G4208A.
Figure 10
42
on page 160 you may configure a custom plate. Measure the
Well-plate Dimensions (straight)
"List of Recommended Plates and
1260 Infinity II Fraction Collector User Manual