Telescopic Runners - Electrolux EOB6631 User Manual

6. Remove the plug of the core
temperature sensor from the socket.
Remove the meat from the appliance.
7. Deactivate the appliance.
WARNING!
Be careful when you remove
the tip and plug of the core
temperature sensor. The core
temperature sensor is hot.
There is a risk of burns.
Every time you put the core
temperature sensor in the
socket, you need to set the
duration and end time again.
When the appliance calculates
the provisional duration time for
the first time, the symbol
flashes in the display. When the
calculation ends, the display
shows the duration of the
cooking. Calculations run in the
background during the cooking
and the duration value in the
display is updated if necessary.
You can change the core temperature at
any time during the cooking:
1. Press: :
• One time - the display shows the
set core temperature which
changes every 10 seconds to the
current core temperature.
• Two times - the display shows the
current oven temperature which
changes every 10 seconds to the
set oven temperature.
• Three times - the display shows
the set oven temperature.
2. Use the knob for the temperature to
change the temperature.

7.2 Telescopic Runners

Keep the installation
instructions for the telescopic
runners for future use.
With telescopic runners you can put in
and remove the shelves more easily.
CAUTION!
Do not clean the telescopic
runners in the dishwasher. Do
not lubricate the telescopic
runners.
1. Pull out the right and left hand
telescopic runners.
2. Put the wire shelf on the telescopic
runners and carefully push them into
the appliance.
Make sure you push back the telescopic
runners fully in the appliance before you
close the oven door.
7.3 Accessories for steam
cooking
The steam kit accessories are
not supplied with the
appliance. For more
information, please contact
your local supplier.
The dietary baking dish for steam
cooking functions
ENGLISH 13
°C
°C