Top Bar; Right-Hand Bar - HortiMaX Go! User Manual

2.1.2

Top Bar

The breadcrumb trail on the left-hand side of the top bar shows your location within
the software. Each icon in the trail represents a tile of a particular control. The
number indicates which zone or control you are looking at. If you tap an icon in the
breadcrumb trial, you will be taken directly to the corresponding tile.
The breadcrumb trail leading to stage control for the roof screens might look like this:
In words: Home screen => Zone 1=> Roof screen 1 => Stage control.
Three icons may be shown on the right-hand side of the top bar. These are direct links
to:
2.1.3

Right-hand bar

The bar on the right-hand side of the screen always contains the same information
and allows you to access a number of basic settings.
8
Fixed The fixed position control screen provides an overview of the
position zone controls. Here you can opt for a fixed position or
control automatic control. If you select automatic control, the
controller will use the stage control settings.
Valve The valve group manual control screen shows information
group about the status of the valves in each valve group. It also
manual includes a start button to activate a valve group immediately.
control
Alarm The alarm screen shows all active alarms. The bell icon shows
screen the number of active alarms and whether the system bell is
active.
Help This button opens a help screen with a QR code. If you scan
button the QR code, the corresponding online help page will open.
Arrow This button is enabled (white) if there is more information
up available above the information shown.
Arrow This button is enabled (white) if there is more information
down available below the information shown.
System Tap this button to change the system settings such as
time language, location, and system time. This is also where you
will find a scanning screen where you can have the
HortiMaX-Go! scan for Smart Switches. Below this button,
the current time is shown.
HortiMaX-Go!