Table of Contents
Advertisement
HortiMaX-Go!
The irrigation program includes the ability to use a separate valve group for each
valve, so you can program fertigation recipes for each individual valve.
4.1.3
Dosing fertilizers
In order to dose fertilizers, the desired EC value needs to be set for each valve group.
The EC (and pH) settings are located at the bottom of the automatic irrigation screen
that you can access by tapping the down arrow in the right-hand bar: .
If more than one fertilizer is used, you can set the dosing ratio of each fertilizer. The
dosing ratio is set for each valve group. By default, the irrigation program uses a
ratio of 100% for all available fertilizers. The HortiMaX-Go! supports up to four
fertilizer dosing valves.
22
Advertisement
Table of Contents
