Smart Manual Control Switches; Led Indications - HortiMaX Go! User Manual

5.1 Smart manual control switches

The manual control knob on the Smart Switches can be used to either disable
automatic control and operate the connected equipment manually, or switch the
equipment off. If you switch to manual control, the controller will continue to keep
track of the status or position of your equipment. This unique feature means the
controller is able to monitor the current situation and the operating times of your
equipment with much greater accuracy.
When you turn the knob from manual control back to automatic control, the controller
will immediately apply the correct positions. This is unlike conventional switches that
require the controller to be reset or synchronized.
If the controller and/or bus communication are non-operational, the Smart
Switches will be unable to control the equipment automatically. However,
using the control knob, you will still be able to adjust the Smart Switches
manually, so you can turn equipment on or off or open or close it. In this
situation, the equipment positions and operating times shown by the
controller may differ from their actual values.

5.2 LED indications

The Smart Switches feature two types of LEDs on the bottom circuit board and the
switch covers. Listed below are the meanings of the various LED indications:
26
HortiMaX-Go!