HortiMaX Go! User Manual page 6

Irrigation
unit
Climate
zone
Alarm
contact
Tile header
On the left-hand side of the tile header, you will find the icon of the control or control
component and the zone number.
On the right-hand side of the tile header, icons may be shown with the following
meanings:
The control is set to automatic mode. This means that the controller will
take automatic control actions based on the pre-programmed software
settings.
The control is set to a fixed position.
No connection could be established with the hardware associated with the
control. This is a serious situation that will trigger an alarm.
The tile header can have three colours: green, orange and red.
Green
Orange
6
HortiMaX-Go!
If an irrigation unit is present, it will be shown on the second
tile. Under this tile, you will find all the irrigation control
settings.
Each zone (greenhouse compartment) has its own tile on the
home screen. The zone number is indicated in the black box
at the bottom right of the icon. Under a zone tile, you will
find all the controls belonging to that zone.
The Alarm contact tile provides direct access to the Alarm
contact settings. The Alarm contact is a shared function for
all climate zones and the irrigation unit.
If the header is green, then the control is active and the
situation is normal. A control can be set to automatic mode or
a fixed position.
If the header is orange, then a system in one of the underlying
levels has been set to manual control. As a result, the
controller is unable to control the connected equipment. This
could cause a hazardous situation as the rain, gale or other
overrides will not be applied.