Setting Periods - HortiMaX Go! User Manual

would normally disable CO
target value.
3.2.5

Setting periods

The HortiMaX-Go! allows you to set four periods per 24 hours. By setting different
periods, you can have target values vary throughout the day. You can enter the period
start times in clock time or in relation to sunrise or sunset. At the bottom of the stage
screen, you will see the start and end times of the selected period:
14
HortiMaX-Go!
For the central heating system
the pipe temperature or select the automatic mode
automatic mode, the pipe temperature will vary to achieve the
pre-set stage temperature.
For CO control , you can set a maximum value in ppm above
2
which CO dosing will switch off. A different maximum value can
2
be set for the temperature stage. For example, when it is very
warm and the vents are wide open, CO
CO dosing is generally not necessary for the night period. You
2
dosing for the night period or select an extremely low
2
, you can set either a value for
. In the
dosing will be very costly.
2