Meteo-Go; Mtv-Go - HortiMaX Go! User Manual

5.4 Meteo-Go!

The following readouts are available:
Outside temperature
Solar radiation
Wind speed
Wind direction
Rain detection
Location
Relative humidity
If you have multiple controllers, they can share the data from one Meteo-Go!.
Throughout the control software, there are override settings that are
triggered by key weather readings. The purpose of these settings is to
prevent damage to your greenhouse and/or crop. Override settings are set to
safe values by default, but can be adjusted by the user. The controller also
takes the weather readings into account for maintaining the ideal greenhouse
climate.

5.5 MTV-Go!

28
HortiMaX-Go!
The Meteo-Go! is the weather station of the HortiMaX-
Go!. This compact device is installed outside the
greenhouse and collects weather data needed for
automatic climate and irrigation control.
The MTV-Go! is a sensor unit that measures the
ambient temperature and relative humidity in the
greenhouse. One MTV-Go! unit needs to be installed in
each climate zone. The ambient temperature and
humidity are essential readings in crop production,
and therefore essential for automatic climate control.
Thanks to the special fanless design of the MTV-Go!
housing and electronic sensors, the sensor unit
requires little maintenance. Although the housing is
designed to protect the internal sensors, do not spray
chemicals directly into the housing.