Table of Contents
Advertisement
The two circles next to the start times represent the 24-hour clock. White represents
the day, black represents the night. The coloured sections with numbers in the inner
circle indicate the periods.
If periods overlap, the highest period number will apply.
Setting the day and night periods
We recommend using at least two periods for most crops. Setting two periods for the
day and the night is very simple. To do this, select the following settings:
If you delete periods and then add them again, the corresponding settings will
be retained. Check whether the pre-set values are correct for all the selected
periods.
3.2.6
Humidity control
The basic settings for humidity control can be found on the stage screen. You can
open these settings by tapping the droplet at the bottom right of the screen:
16
Start time after sunset
HortiMaX-Go!
.
Advertisement
Table of Contents
