Smart Switches - HortiMaX Go! User Manual

5

Smart Switches

Smart Switches are the manual control switches used for the HortiMaX-Go!. In
addition to an electrical circuit, these switches feature a processor and software. The
Smart Switches perform specific control actions for the equipment connected to them.
The switches are advanced control devices that can process a wide range of
information, such as status and position determination and run and operating times.
The installation engineer can also connect various contacts to the switches, such as
end contacts, emergency stop contacts and thermal cut-out contacts (also called
'thermal protector contacts'). If such contacts are connected, the Smart Switch can
use the collected status information for control purposes and relay the information to
the central HortiMaX-Go! controller. This greatly enhances the system's reliability and
allows alarms to be generated instantly if something goes wrong with your
equipment.
No.
1
2
3
4
5
6
Meaning
DIP switch for setting the Smart Switch address
LED indicators for bus communication
Manual control knob (optional)
LED indicators for control actions active
Power supply and bus connections
Connections for peripheral equipment
HortiMaX-Go!
25