Components
VS0801A Front View
No.
Component
1
Port Selection
Pushbuttons
2
Port LEDs
3
IR Receiver
1
2
Pressing a port selection pushbutton routes the
VGA/Audio source from the corresponding input
port to the output port for display.
There is one port LED next to each port selection
pushbutton. This lights green to indicate that the
corresponding port has been selected.
The connected port LEDs will flash when the front
panel pushbuttons are manually locked or when
auto switch mode has been activated.
(See Operation, page 15, for details)
This receives signals from the IR remote control.
Chapter 1. Introduction
Function
3
4