Requirements; Source Device; Display Device; Cables - ATEN VS0801A User Manual

8-port vga switch with auto switching

Hide thumbs Also See for VS0801A:

Table of Contents

VS0801A User Manual

Requirements

The following equipment must be installed on the source device or computer

that acts as a source of VGA/Audio content:

 VGA video card with HDB-15 connector

 Audio source with stereo output

 A VGA, SVGA, UXGA, WUXGA or multisync monitor or multimedia

projector with an HDB-15 connector

 Stereo speakers

 1 VGA/Audio cable or Port Switching VGA Cable* for each source device

 1 VGA/Audio cable for your display and audio device

Note: Port Switching VGA Cables (Part No. 2L-5203B) are available and sold

through authorized ATEN dealers. We strongly recommend that you

purchase high-quality cables of appropriate length since this will affect

the quality of the audio and video display.

Table of Contents