Table of Contents
Advertisement
IR Remote Control
1
2
No.
Component
1
Port Up / Port Down
Buttons
2
Port Selection Buttons Press a button to bring the focus directly to the
3
On / Off Button
Press the Port Up button to cycle forward through
the source devices (1 to 2; 2 to 3; ... 8 to 1).
Press the Port Down button to cycle backward
through the source devices.(8 to 7; 7 to 6; ... 1 to 8).
source device attached to its associated port.
This button enables / disables the video output.
Chapter 1. Introduction
ON / OFF
Function
3
6
Advertisement
Table of Contents
