VS0801A User Manual
Cable Button Commands
The Cable Button command allows you to turn on and off the Port Switching
VGA Cable button function (see VGA Cable Source Selection, page 16) for the
VS0801A.
The formula for the Cable Button command is as follows:
1. Cable Command + Control Command [Enter]
For example, to turn off the VGA Cable Button function, type the following:
cable off [Enter]
The following tables show the possible values for the Cable and Control
commands:
The following table shows the available command list:
Command
Control
cable
cable
Note: Each command string can be separated with a space.
25
Command
cable
Cable Button command
Control
on
Enable Cable Button function
off
Disable Cable Button function
Enter
on
[Enter]
off
[Enter]
Description
Description
Description
Enable Cable Button function (default)
Disable Cable Button function