Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ATEN VS0801HB
Summary of Contents for ATEN VS0801HB
- Page 1 8-Port True 4K HDMI Switch VS0801HB User Manual www.aten.com...
-
Page 2: Rohs
VS0801HB User Manual Preface EMC Information FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. -
Page 3: User Information
VS0801HB User Manual User Information Online Registration Be sure to register your product at our online support center: International http://eservice.aten.com Telephone Support For telephone support, call this number: International 886-2-8692-6959 China 86-10-82961301 or 86-10-82961302 Japan 81-3-5615-5811 Korea 82-2-467-6789 North America... -
Page 4: Package Contents
© Copyright 2018 ATEN® International Co., Ltd. Manual Date: 2018-03-01 ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved. All other brand names and trademarks are the registered property of their respective owners. -
Page 5: Table Of Contents
Restarting the VS0801HB........14... -
Page 6: About This Manual
VS0801HB User Manual About this Manual This user manual is provided to help you get the most from the VS0801HB. It covers all aspects of installation, configuration, and operation. An overview of the information found in the manual is provided below. -
Page 7: Conventions
VS0801HB User Manual Conventions This manual uses the following conventions: Indicates text that you should key in. Monospaced Indicates keys you should press. For example, [Enter] means to press the Enter key. If keys need to be chorded, they appear together in the same bracket with a plus sign between them: [Ctrl+Alt]. -
Page 8: Product Information
VS0801HB User Manual Product Information For information about all ATEN products and how they can help you connect without limits, visit ATEN on the Web or contact an ATEN Authorized Reseller. Visit ATEN on the Web for a list of locations and telephone numbers: International http://www.aten.com... -
Page 9: Introduction
Introduction Overview The ATEN VS0801HB is designed for applications that require routing of 8 sources to one compatible display device. The VS0801HB supports video resolutions up to true 4K (4096 x 2160 @ 60Hz 4:4:4), data rates up to 18 Gbps, 3D, Deep Color up to 12-bit, and HD lossless audio formats. -
Page 10: Features
Chapter 1. Introduction Features Allows up to 8 HDMI sources to be connected to one HDMI display HDMI 2.0 (3D, Deep Color, 4K); HDCP 2.2 compliant Superior video quality – True 4K resolutions of 4K x 2K @ 60 Hz (4:4:4) and standard 1080p (1920 x 1080 @ 60 Hz) Built-in bi-directional RS-232 serial port for high-end system control Switch modes for automatic port selection... -
Page 11: Planning The Installation
1 ~ 8 source devices equipped with an HDMI Type-A connector 1 display device equipped with an HDMI Type-A connector 1 ~ 8 HDMI cables (each not exceeding 3 m) to connect the VS0801HB to source devices 1 HDMI cable (not exceeding 3 m) to connect the VS0801HB to the display... - Page 12 Chapter 1. Introduction This Page Intentionally Left Blank...
-
Page 13: Hardware Setup
Press to enable the standby mode, a low-power mode where the port selection pushbuttons, port LEDs, and IR receiver are disabled. To disable the standby mode, press the power button again. Power LED Lights green to indicate that the VS0801HB is in standby mode. -
Page 14: Rear View
Auto Switch ON/OFF Enables or disables the next mode. For details, see Setting the Switch Mode, page 13. Note: When the Auto Switch is put to ON, the VS0801HB will remain in next mode regardless of any RS-232 commands to set the unit into other switch modes. -
Page 15: Ir Remote Control Unit
VS0801HB User Manual IR Remote Control Unit ON / OFF Component Description Port Up / Port Down Press the Port Up Button to cycle forward (e.g. source 1 Buttons to 2) through the source devices and the Port Down Button to cycle backward (e.g. source 2 to 1). -
Page 16: Installation
Safety Instructions, page 17. 2. Do not power on the VS0801HB and the connected devices until all the necessary hardware is connected. Follow the steps below to safely connect the required devices to the VS0801HB. Blu-ray Player Set-top Box... - Page 17 VS0801HB User Manual 5. To configure the VS0801HB system settings using RS-232 serial commands, connect a hardware/software controller to the RS-232 Serial Port on the VS0801HB. 6. Power on the VS0801HB and the connected devices. Note: To ensure the output quality, make sure the HDMI cables used in this...
- Page 18 Chapter 2. Hardware Setup This Page Intentionally Left Blank...
-
Page 19: Operation
Chapter 3 Operation Overview You can operate the VS0801HB using the panel pushbuttons, the IR remote control unit, or an RS-232 serial controller. The availability of actions with the three methods is summarized in the table below. Operation Methods Action... -
Page 20: Switching The Display Source
IR remote control unit Aim the IR remote control unit at the VS0801HB and press the corresponding Port Selection Button. Alternatively, cycle through the available sources by pressing the Port Up button to cycle forward (e.g. -
Page 21: Setting The Switch Mode
Setting the Switch Mode, page 13. Note: When the Auto Switch is put to ON, the VS0801HB will remain in next mode regardless of any RS-232 commands to set the unit into other switch modes. Enabling/Disabling the Priority and the POD Mode Send an RS-232 command from the serial controller. -
Page 22: Enabling/Disabling The Standby Mode
2. Unplug the power adapter cable from the VS0801HB. 3. Wait 10 seconds, and then replug the power adapter cable 4. After the VS0801HB is powered on, power on the attached devices. Note: When the VS0801HB is restarted, it selects the first port detected with a powered-on source. - Page 23 Turn off the output port sw off Change the switch mode Enable the next mode swmode next The VS0801HB switches to the next port that has a new source device (Default) connected to it. Enable the priority mode swmode i<source_number>...
- Page 24 Chapter 3. Operation This Page Intentionally Left Blank...
-
Page 25: Appendix
Appendix Safety Instructions General This product is for indoor use only. Read all of these instructions. Save them for future reference. Follow all warnings and instructions marked on the device. Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result. - Page 26 Appendix Do not allow anything to rest on the power cord or cables. Route the power cord and cables so that they cannot be stepped on or tripped over. If an extension cord is used with this device make sure that the total of the ampere ratings of all products used on this cord does not exceed the extension cord ampere rating.
-
Page 27: Rack Mounting
VS0801HB User Manual Rack Mounting Before working on the rack, make sure that the stabilizers are secured to the rack, extended to the floor, and that the full weight of the rack rests on the floor. Install front and side stabilizers on a single rack or front stabilizers for joined multiple racks before working on the rack. -
Page 28: Technical Support
Support Documentation Software Updates Telephone Support 1-888-999-ATEN ext 4988 When you contact us, please have the following information ready beforehand: Product model number, serial number, and date of purchase Your computer configuration, including operating system, revision level, expansion cards, and software Any error messages displayed at the time the error occurred The sequence of operations that led up to the error. -
Page 29: Specifications
VS0801HB User Manual Specifications Function Specifications Video Input Interfaces 8 x HDMI Type A Female (Black) Impedance 100 Ώ Max. Distance Video Output Interfaces 1 x HDMI Type A Female (Black) Impedance 100 Ώ Video Max. Data Rate 18 Gbps (6 Gbps per lane) Max. - Page 30 Appendix Function Specifications Operating Temperature 0 - 40°C Storage Temperature -20 - 60°C Humidity 0 x 80% RH, Non-Condensing Physical Properties Housing Metal Weight 2.14 Kg (4.72 lb) Dimensions (L x W x H) 48.3 x 15.8 x 4.4 cm (19.0 x 6.2 x 1.7 in)
-
Page 31: Limited Warranty
ATEN will provide a repair service, without charge, during the Warranty Period. If a product is detective, ATEN will, at its discretion, have the option to (1) repair said product with new or repaired components, or (2) replace the entire product with an identical product or with a similar product which fulfills the same function as the defective product.
Need help?
Do you have a question about the VS0801HB and is the answer not in the manual?
Questions and answers