Switch Port Commands - ATEN VS0801A User Manual

VS0801A User Manual

Switch Port Commands

The formulas for Switch Port commands are as follows:
1. Switch Command + Input Command + Port Number [Enter]
For example, to switch to input port 02, type the following:
sw i02 [Enter]
2. Switch Command + Control [Enter]
For example, to switch to the next input port, type the following:
sw + [Enter]
The following tables show the possible values for the Switch, Input, Port
Number and Control commands:
Input Command
Port number
The following table shows the available command list:
Command Input
sw
sw
sw
Note: 1. Each command string can be separated with a space.
2. If the Port Number string is skipped, the default value is used.
19
Command
sw Switch command
i Input command
xx 01-08 port (default is 01)
Control
on Turn on the display
off Turn off the display
+ Next Port
- Previous Port
Port Control
i xx
on
off
+
-
Description
Description
Description
Description
Enter Description
[Enter] Switch to Input Port xx
[Enter] Turn on Display
[Enter] Turn off Display
[Enter] Switch to the next input
[Enter] Switch to the previous input