Default; Errdump - HP Integrity rx1620 Operation Manual

Parameters
<cpu> specify a processor
<on|off> state to set the processor to
Operation
Issuing cpuconfig with no parameters displays the config/deconfig status of all processors. A user can
reconfigure CPUs by specifying a CPU number and a state (on or off). If a valid state is entered and is
different from the current state of a CPU, its status changes on the next boot. The last remaining configured
CPU in a system cannot be deconfigured.
Example 4-7 cpuconfig Command
Shell> cpuconfig
PROCESSOR INFORMATION
# of
CPU Logical
Slot CPUs Speed
--- ------- ---------
0 1 1 GHz
1 1 1 GHz
Example 4-8 cpuconfig 2 Command
Shell> cpuconfig 2 off
CPU will be deconfigured on next boot.
Shell> cpuconfig
PROCESSOR INFORMATION
# of
CPU Logical
Slot CPUs Speed
--- ------- ---------
0 1 1 GHz
1 1 1 GHz

default

Allows the user to restore non-volatile memory (NVM) to default values and clear NVM storage values.
Syntax
default [efi|sal]
default clear [bmc|efi|sal]
Parameters
clear clears NVM storage values
Operation
Default sets NVM and stable store values to predefined default values. To the normal user only a subset of
values are available for default. Executing "default clear" resets the system.

errdump

Displays the contents of processor internal memory logged on the first machine check abort (MCA) for all
processors present in the system.
Chapter 4
L3 L4 Family/
Cache Cache Model
Size Size (hex.)
---- ----- ------
1.5 MB None 1F/01
1.5 MB None 1F/01
L3 L4 Family/
Cache Cache Model
Size Size (hex.)
---- ----- ------
3 MB None 1F/00
3 MB None 1F/00
Processor
Rev State
---- ----------
B1 Active
B1 Active
Processor
Rev State
---- ----------
B2 Active
B2 Sched Deconf
Utilities
EFI/POSSE Commands
37