Events Without Sensors - HP Integrity rx1620 Operation Manual

Event, Error, and Warning Messages
EFI Error and Warning Messages
83 03 ipmi/RS req from the CLI thd for CHASSIS_CONTROL_HARD_RESET
00 FA CHASSIS_CONTROL_POWER_DOWN req from the ACPI sensor (S5)
00 D9 CHASSIS_CONTROL_POWER_DOWN req from CPU0 temp sensor
01 0E CHASSIS_CONTROL_POWER_UP req from WakeOnLan sensor

Events Without Sensors

The BMC logs these events with a "sensor number" of 0; there is no matching SDR entry.
Table A-6 Events Without Sensors
Triplet
10:70:64 SEL almost full
12:70:64 BMC entering firmware update
mode
12:70:05 SFW flash Inlock
12:70:06 Front panel lock
12:F0:06 Front panel unlock
12:70:64 Firmware update application:
starting component update
12:70:64 Firmware update application:
ending component update
12:70:80 BMC entering special mode
12:70:A1 BMC firmware initializing
1D:70:00 BMC Cold Reset
1D:70:01 BMC Warm Reset
1D:70:02 BMC Cold Reset after SDRR
update
120
Event
1F
Mode
Major FW
rev.
data 2 data 3
%full
–
Minor FW
rev.
Notes
The BMC logs this when
the SEL is 75% full
Mode is a bit-map:
Bit 0: Shmoo
Bit 1: MfgTest
Bit 2: Shutdown override
Bit 3: Fixed fan speed
Bit 4: Mfg
Bits 7-5: unused, set to 0
Appendix A