HP Integrity rx1620 Operation Manual page 57

Exit
VenHw(D65A6B8C-71E5-4DF0-A909-F0D2992B5AA9)
Boot0000
Set Auto Boot TimeOut
Use this option to set the amount of time the system pauses before attempting to launch the first item in the
Boot Options list.
For example:
Set Auto Boot Timeout. Select an Option
Set Timeout Value
Delete/Disable Timeout
Help
Exit
Interrupting the timeout during the countdown stops the Boot Manager from loading any boot options
automatically. If there is no countdown, boot options must be selected manually.
• To set the auto boot timeout value, in seconds, select Set Timeout Value and enter the desired value.
• To disable the timeout function, select Delete/Disable Timeout.
When this option is selected, the system does not automatically boot. The system stops at the
NOTE
EFI boot menu and waits for user input.
Select Active Console Output Devices
Use this option to define the devices that display output from the system console. This list normally includes
the VGA monitor and a serial port for directing output to a terminal emulation package.
NOTE If you install a modem in your system, make sure you disable the modem serial port in both the
Active Console Input and Active Console Output device lists.
Some operating systems support multiple consoles, such as a simultaneous serial and VGA
NOTE
output. See your OS documentation to determine how many consoles are supported with your
system. Multiple consoles are not supported for HP-UX or Windows (use the Smart Setup CD
to switch between COM A and the MP on Windows systems).
For example:
Select the Console Output Device(s)
Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(PcAnsi)
Chapter 4
Using the Boot Option Maintenance Menu
Utilities
57