Mass Portal Pharaoh XD Series User Manual page 35

DUAL EXTRUDER — CONTINUED
INFO If there is a conflict with
your settings or selection
of processes with the part,
Simplify3D will give a warning
8) To make sure that the G-code
is prepared as you would like it
to be, in "Preview Mode" on the
left side of the screen there will
be an option "Coloring." Select
"Active Toolhead" and it will show you which extruder is printing
which part.
If you have any further questions about the dual extrusion set-up
or process, please feel free to contact
support@massportal.com
35