Mass Portal Pharaoh XD Series User Manual page 26

NOTE Be sure to
click the "Save"
button after
changing setting
in the EEPROM
Data. The check
mark will turn to
a Save button
when something is
changed.
26
PHARAOH TOUCH TM — CONTINUED
Calibration:
Reset: If there was some problem with the previous calibration,
notice that the bed was slanted, you can reset the calibration
information
Calibrate: Start the calibration for your printer
Bed coating:
Can set the bed coating to the presets using the "Set bed
coating material" or can set a custom thickness by selecting the
"Thickness" option.
EEPROM: You no longer need to connect to a computer to edit
the EEPROM settings. Here you are able to edit all EEPROM
settings using the +/- buttons or by selecting the number and
typing in the desired value. You can use the arrows on the right
side to scroll up and down. The button in the top right of the
screen is used to go back to the settings menu.