Standalone Printing - Mass Portal Pharaoh XD Series User Manual

18

Standalone Printing

Pharaoh Touch TM has been designed to make the printing
process more convenient to you. You are able to control your
printer easily with the use of the touch screen.
WARNING
The SD card should NOT be removed from
the printer unless instructed to by Mass Portal support. To load
gcodes to the printer use a USB flash, TCP/IP, USB cable, or
Internent connection.
When to print in standalone mode
- When printing takes a long time for larger objects, independent
from the computer
- When you repeatedly print the same object, when you know
that all the settings in your G-code are just fine
- To save electricity by not having the computer turned on
- When taking the printer to another location like shows or
meetings
Power management
The printer will cool down when print is finished (depending on
settings in g-code file or after an hour of inactivity), but it will not
turn itself off.
Standalone printing process
a) Select the "Ready to Print" icon on the right side of the screen
b. Select "Object to Print" -> Locate the file you want to print ->
Select for Printing"
c. Select the material you will be printing with
d. Select the proper bed coating that is currently on the printer
d. Select "Start Printing"
e. The printer will heat up and start to print when ready.