DUAL EXTRUDER — CONTINUED
b)In the "Tool Change Script" write the
following
c) In the "Ending Script" tab write the following
5) In the "Support" tab make sure that the support extruder is
properly selected
6) In the "Additions" tab select "Prime Pillar." This will be used
when changing materials
7) Prepare the rest of your settings according to the object and
click "Prepare to print"
INFO You will also
need to go to the
"Advanced" tab to
make sure the "Tool
Change Retration is
also set to the proper
value. (see image)
INFO You will
need to adjust the
"Pillar Width" size
depending on the
colors you are using.
For some colors it
will need to be larger
and others can be
smaller.
33