Ventilation System - Mass Portal Pharaoh XD Series User Manual

Chamber Ventilation
The chamber ventilation system has been created for safe, high
quality printing. With safety as the system's main purpose, the
chamber ventilation will make your printing experience worry
free.
Safety
When printing using the chamber ventilation system, you can
always leave the windows and door on the printer. This will help
prevent any foreign objects from going into the printing area.
Also it will help the printer to be safe around any age group
as children will not be able to put their hands in the printing
chamber while the printer is in operation.
The fans also include filters to clean any fumes from the print
chamber. Studies have shown that some printing materials, such
as ABS, can release toxic fumes while printing. With the use of
the Mass Portal ventilation system, these fumes are filtered from
the air creating a safe work environment.
Material
Though it is not suggested to print some materials with an
enclosed chamber, such as PLA, the ventilation system has
different settings to allow the printer to print any material in an
enclosed chamber.
Constant Chamber Temperture
While 3D printing, it is also important to keep the printing
environement at a constant temperature. With the heated bed
the chamber can be warm, which is useful for printing materials
such as ABS, Nylon, or Polycarbonate. (See table)
16