TIP You can rename
the processes if
you would like. First
they will come up
as Process 1 and
Process 2
34
DUAL EXTRUDER — CONTINUED
Dual extrusion for Multiple Colors:
Printing with two colors will be similar to printing with support,
but when printing with two colors, you will need to use two
processes.
1) Add a new Process on the left side of the screen.
2) When editing Process 1, make the "Extruder Toolhead Index"
Tool 0 and for Process 2,Tool 1
3) Create the Scripts as shown previously
4) Select "Prime Pillar" in the Additions Tab and make sure that
the "Prime Pillar Extruder" is set to "All Extruders."
5) For each process you will need to select which model you
would like printed with that process.
a) In "Process settings" click "Select Models"
b)Select the model you would like with that process
6) Prepare other settings for your object as needed
7)Click "Prepare to Print" and make sure that both processes are
selected