SMA SUNNY ISLAND 4.4M Operating Manual page 28

5 Mounting
2. Mark the position of the drill holes using the wall mounting bracket. Use at least one hole on the right-hand and
left-hand side in the wall mounting bracket.
3. Drill the holes and insert the screw anchors.
4. Secure the wall mounting bracket horizontally on the wall using screws and washers.
5. If the Sunny Island is to be secured against theft, mark the drill holes for the anti-theft device. Use at least one hole
on the right and one on the left.
6. Mount the SI4.4M-12 to the wall mounting bracket. For this,
use the side recess grips. Keep the Sunny Island in a horizontal
position when moving it.
7. Mount the SI6.0H-12 and SI8.0H-12 to the wall mounting
bracket. For this, use the side recess grips or a steel rod
(diameter: maximum 30 mm). Keep the Sunny Island in a
horizontal position when moving it.
8. Use an Allen key (AF 5) to attach the Sunny Island to the wall
mounting bracket on both sides with the M6x10 screws
provided (torque: 4 Nm to 5.7 Nm). This will prevent the
Sunny Island from being lifted off the bracket.
9. Close the recessed grips with the ventilation grids. Place the
ventilation grid marked links/left on the left recessed grip and
the ventilation grid marked rechts/right on the right recessed
grip.
28 SI44M-80H-12-BE-en-10
SMA Solar Technology AG
Operating Manual