SMA SUNNY ISLAND 4.4M Operating Manual page 26

5 Mounting
max. 15°
90°
Figure 4: Permitted and prohibited mounting positions
Dimensions for mounting:
Figure 5: Position of the anchoring points (dimensions in mm)
Recommended clearances:
If you maintain the recommended clearances, adequate heat dissipation will be ensured. Thus, you will prevent power
reduction due to excessive temperature.
☐ Maintain the recommended clearances to walls as well as to other inverters or objects.
☐ If multiple inverters are mounted in areas with high ambient temperatures, increase the clearances between the
inverters and ensure sufficient fresh-air supply.
26 SI44M-80H-12-BE-en-10
217.3
20
79.2
104.6
87.3 130
58.3 25
134
217.3
11
Ø 11
110
130 87.3
Ø 9
25 58.3
134
SMA Solar Technology AG
Operating Manual