Ce Marking; Fcc Statement; About Revision - Pro-face PS-3710A Series Hardware Manual

Hide thumbs Also See for PS-3710A Series:
Table of Contents

Advertisement

PS3710A-T41/PS3710A-T42/PS3711A-T41/PS3711A-T42 units are CE marked products that conform to EMC
directives and Low Voltage Directives EN55011 Class A, EN61000-6-2, and EN60950-1.
PS3710A-T41-24V/PS3710A-T42-24V/PS3711A-T41-24V/PS3711A-T42-24V units are CE marked products that
conform to EMC directives EN55011 Class A and EN61000-6-2.
The following units conform to the FCC Rules.
United States FCC Part 15, Subpart B, Class A EMI Compliance Statement:
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his or her own expense.
The nameplate on the PS-A has the revision number of the PS-A. In the example below, the asterisk, which is placed at
the "A" position, shows that the revision number is "A".
12

CE Marking

FCC Statement

Product Model No.
PS3710A-T42
PS3710A-T42-24V
PS3711A-T42
PS3711A-T42-24V

About Revision

When PS-A is Rev. A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ps-3711a series

Table of Contents