Table of Contents
Advertisement
Use only factory specified replacement parts. AEMC
responsible for any accident, incident, or malfunction following a repair
done other than by its service center or by an approved repair center.
5.1
Recharging the Battery
If the
symbol displays, the battery needs to be recharged.
Connect the instrument to the 115V
(charging starts automatically).
•
bAt on the small display and chrG on the main display signifies
fast charging in progress.
•
bAt on the small display and chrG flashing on the main display
signifies slow charging.
•
bAt on the small display and FULL on the main display signifies
that charging is complete.
If the instrument is started up and the battery voltage is >8V, then the
normal use of the device is permitted.
NOTE: The battery should only be changed by an authorized repair facility
recognized by AEMC
24
CHAPTER 5
MAINTENANCE
AC
Instruments.
®
®
power cord via the connector
Megohmmeter Model 6505
will not be held
Advertisement
Table of Contents
