Displaying Version Information; Figure 3.11: Version Window - IBM 09N4290 User Manual

30 IBM Console Switch Installation and User's Guide
5. (Optional) Click Test to activate the screen saver test which lasts 10 seconds then returns you
to the Security window.
6. Click OK.
NOTE: Activation of the screen saver mode disconnects the user from a server; no server is selected. The status
flag displays Free.
Exiting the screen saver mode
Press any key or move the mouse. The Main window opens and any previous server connection
will be restored.
Turning off the screen saver
1. In the Security window, clear the Enable Screen Saver check box.
2. Click OK.
Turning on the screen saver
After the screen saver is enabled, press Print Screen, then press Pause.

Displaying Version Information

The OSCAR interface enables you to display the versions of the console switch firmware and the
switch cable hardware. For optimum performance, keep the console switch firmware current.
For more information, see "Appendix A: Firmware Updgrades."
1. Press Print Screen. The Main window opens.
2. Click Commands
lists the subsystem versions in the console switch.

Figure 3.11: Version Window

Display Versions The Version window opens. The top half of the window
- .