GE L30 Instruction Manual page 314
Line current differential system
Hide thumbs
Also See for L30:
- Instruction manual (698 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (667 pages)
Table of Contents
Advertisement
PRODUCT SETUP
5.3.5.13 Web server HTTP protocol
5
SETTINGS PRODUCT SETUP COMMUNICATIONS WEB SERVER HTTP PROTOCOL
WEB SERVER
HTTP PROTOCOL
The L30 contains an embedded web server and can display pages in a web browser. The web pages are organized as a
series of menus that can be accessed starting at the L30 "Main Menu." Web pages are read-only and are available showing
DNP and IEC 60870-5-104 points lists, Modbus registers, event records, fault reports, and so on. First connect the L30 and a
computer to an Ethernet network, then enter the IP address of the L30 Ethernet port in a web browser.
To close the port, set the port number to 0.
Any change takes effect when the L30 is restarted.
5-100
Figure 5-47: File transfer by IEC 61850
HTTP TCP PORT
NUMBER(80): 80
Range: 0 to 65535 in steps of 1
L30 LINE CURRENT DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL
CHAPTER 5: SETTINGS
Advertisement
Table of Contents
