Handling; Assembly Information; Mounting Conditions - Viega Eco Plus Instructions For Use Manual

3 Handling

3.1

Assembly information

3.1.1

Mounting conditions

Suitable walls
Construction height
WC ceramic
Actuation
Viega Eco WC element
The WC element can be mounted on the following walls:
masonry walls in acc. with DIN EN 1996-1-1
n
n concreted walls in acc. with DIN 1045
metal support profile in acc. with DIN 18183
n
The WC element may only be mounted on even wall surfaces.
With the construction height, the marked height of the upper edge of
the finished floor must be observed.
The WC element can only be used in combination with wall-hung WCs
(fixing gauges for bore hole 180 mm).
The WC element can be extended by a remote actuation
Visign for Public1 (model 8326.21) or by an electronic actuation (model
8350.31 or 8350.32). The corresponding actuation method must be pre-
pared before the WC element is clad and tiled.
The corresponding empty pipe (included in the scope of delivery of the
remote actuation) is required when preparing the remote actuation
Visign for Public1.
Handling
10 from 26