Sierra Wireless MC5725 Hardware Integration Manual page 91

Note: This procedure describes
steps using the Agilent 8648C
signal generator—the Rohde &
Schwarz SML03 is shown for
reference only.
Rev 1.9.1 Feb.09
In the event of a discrepancy in values between this guide and the Product Specification Document (PSD), the PSD takes precedence.
Table 8-2: Test settings for MC87xx Receive path testing
Mode Test category
1
WCDMA Frequency (MHz)
Band
Channel
2
GSM Frequency (MHz)
Band
Channel
1 All values offset from actual center channel by +1.2 MHz
2 All values offset from actual center channel by +67 kHz
To test the DUT's receive path:
Set up the signal generator:
1.
a.
b.
Set up the DUT:
2.
a.
b.
c.
d.
Proprietary and Confidential
850 900
882.60 948.60
22 29
4182 2812
881.667 948.067 1842.267
18 10
190 65
Set the amplitude to:
· ‐80 dBm (WCDMA mode)
· ‐60 dBm (GSM mode)
Set the frequency for the band being tested. See
Table 8‐2 for frequency values.
AT!UNLOCK
="<customerCode>" or
AT!DAFTMACT
AT!DASBAND=<band>
· See Table 8‐2 for <band> values
AT!DASCHAN=<channel>
Testing
Bands
1800 1900
1961.2 2141.2
15 9
9400 9750
1960.067
11 12
697 661
AT!ENTERCND
2100
91