CDMA and GSM / UMTS Mini Card Hardware Integration Guide
112
In the event of a discrepancy in values between this guide and the Product Specification Document (PSD), the PSD takes precedence.
Important compliance
information for North American
users
The MC57xx / MC87xx modem has been granted modular
approval for mobile applications. Integrators may use the
MC57xx / MC87xx modem in their final products without
additional FCC / IC (Industry Canada) certification if they
meet the following conditions. Otherwise, additional FCC / IC
approvals must be obtained.
1.
At least 20 cm separation distance between the antenna
and the user's body must be maintained at all times.
To comply with FCC / IC regulations limiting both
2.
maximum RF output power and human exposure to RF
radiation, the maximum antenna gain including cable loss
in a mobile‐only exposure condition must not exceed the
levels detailed in Table A‐1, "Required antennas and
maximum antenna gain by module type," on page 101.
The MC57xx / MC87xx modem and its antenna must not
3.
be co‐located or operating in conjunction with any other
transmitter or antenna within a host device.
4.
A label must be affixed to the outside of the end product
into which the MC57xx / MC87xx modem is incorporated,
with a statement similar to the following:
·
For MC5725 / MC5725V:
This device contains FCC ID: N7N‐MC5725
This equipment contains equipment certified under
IC: 2417C‐MC5725
·
For MC5727 / MC5727V:
This device contains FCC ID: N7N‐MC5727
This equipment contains equipment certified under
IC: 2417C‐MC5727
For MC5728 / MC5728V:
·
This device contains FCC ID: N7N‐MC5728
This equipment contains equipment certified under
IC: 2417C‐MC5728
For MC8775 / MC8775V:
·
This device contains FCC ID: N7NMC8775
This equipment contains equipment certified under
IC: 2417C‐MC8775
For MC8780:
·
This device contains FCC ID: N7NMC8780
For MC8781:
·
This device contains FCC ID: N7NMC8781
This equipment contains equipment certified under
IC: 2417C‐MC8781
Proprietary and Confidential
2130114