Advantech AIMB-217 User Manual page 80

Enable/Disable Pei (Early) Display.

GOP Brightness Level
Set GOP Brightness level; value ranges from 0~255.

VBT Select
Select VBT for GOP driver.
IGD Configuration

Integrated Graphics Device
Enable: Enable Integrated Graphics Device (IGD) when selected as the primary
video adaptor.
Disable: Always disable IGD.

Primary Display
Select which of IGD/PCI Graphics device should be Primary Display.

RC6 (Render Standby)
Check to enable render standby support, RC6 should be enabled if S0ix is
enabled. This item will be read only if S0ix is enabled.

GTT Size
Select the GTT Size.

Aperture Size
Select the Aperture Size

DVMT Pre-Allocated
Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the
Internal Graphics Device.

DVMT Total Gfx Mem
Select DVMT 5.0 Total Graphic Memory size used by the Internal Graphics
Device.

Cd Clock Frequency
Select the highest Cd Clock frequency supported by the platform.

GT PM Support
Enable/Disable GT PM Support.

PAVP Enable
Enable/Disable PAVP

BIA
Auto: GMCH Use VBIOS Default;
Level n: Enabled with Selected Aggressiveness Level.

ALS Support
Valid only for ACPI.

IGD Flat Panel
Select IGD Flat Panel

IGD Boot Type
Select preference for Integrated Graphics Device (IGD) display interface used
when system boots.
AIMB-217 User Manual 68