Table of Contents
Advertisement
2.1
Introduction
Most of the device connectors can be accessed from the top of the board during
installation in the chassis. If the system is installed with several cards or the chassis
is packed, partial removal of the card may be necessary to make all connections.
2.2
LAN and USB Ports (LAN1/2, USB0102/
USB0304/USB0506/USB0708/USB0910/
USB1112, USB0910 & USB1112 is BOM optional)
AIMB-217 provides up to four USB 3.0 and eight USB 2.0 ports. Four USB 3.0 are
located on the rear side, and eight USB 2.0 are located internally. The USB interface
complies with the USB specification revision 2.0 that supports transmission rates of
up to 480 Mbps, revision 3.0 that supports transmission rates of up to 5 Gbps, and is
also fuse protected. Furthermore, the USB interface can be disabled in the system
BIOS setup menu.
The AIMB-217 system is equipped with two high-performance 1000 Mbps Ethernet
LAN adapters, both of which are supported by all major network operating systems.
The RJ-45 jacks on the rear panel facilitate convenient LAN connection.
USB0506 USB0708
USB1112 USB0910
Table 2.1: LAN LED Indicators
LAN Mode
1 Gbps link on
100 Mbps link on
Active
AIMB-217 User Manual
USB
USB
0102
0304
LAN12
LAN Indicator
LED1 Green on
LED1 Orange on
LED2 Green flashing
14
Advertisement
Table of Contents
