Dahua PSD81602-A360 Operation Manual page 137

Parameter Note
1. Click "Setup" and the system will pop out the interface of "Working
2. It is to set working period according to the following methods:


3. Click "Save" to complete the setup of working period.
It is the shortest time from when the target crowds in the detection area to
Keep Time
when it triggers alarm.
Sensitivity It is to set the sensitivity which triggers alarm.
Select the check box, the tracking speed dome will automatically trigger
Alarm track
Alarm when the target triggers intelligent rule.
It is the time when the tracking speed dome automatically track the object
Track time
which triggers alarm after alarm occurs.
Select check box and set record channel, the corresponding channel will
implement alarm and record automatically when alarm happens.
Note


Record
Record delay System can delay the record for specified time after alarm ended.
Connect alarm output port to alarm device (such as lamplight, siren and so
on), select check box and set alarm output device, enable alarm linkage
Relay out
output port, and the system can activate corresponding alarm output device
when alarm occurs.
Alarm delay It means the alarm delays a period of time to stop after alarm ends.
Select check box, and the system will send email to inform users when
Alarm occurs.
Note
Send Email
It needs to set Email before enabling the function, please refer to "4.2.6 Set
SMTP Parameter" for more details.
Period".
You can input time numerical value or press the left mouse button to
drag on the setup interface to set.
Click the "Setup" of corresponding week, select the check box in front
of the period on the bottom of the interface, and input time value, there
are six periods to be set every day.
Please refer to "4.1.2.5 Set Path" for record file storage location query
and setting.
The system record needs to meet following two conditions when alarm
happens.
 It has enabled motion detection record, please refer to "4.5.1.1
Configure Record Schedule" for more details.
 It has set auto record, please refer to '4.5.3 Configure Record
Control" for more details.
