Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dahua IPC-HFW5100C
Summary of Contents for Dahua IPC-HFW5100C
- Page 1 HD IR Waterproof Fixed Network Camera User’s Manual Version 1.0.0...
- Page 2 Welcome Thank you for purchasing our network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference!
-
Page 3: Important Safeguards And Warnings
Important Safeguards and Warnings 1．Electrical safety All installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction) Please note: Do not connect two power supplying sources to the device at the same time;... - Page 4 Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens surface. Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean the device.
-
Page 5: Table Of Contents
Table of Contents General Introduction ......................1 Overview ........................1 Features ........................1 Specifications ......................2 1.3.1 Performance ...................... 2 Structure ..........................4 Multiple-function Combination Cable ..............4 Framework and Dimension ..................5 Bidirectional talk ....................... 6 2.3.1 Device-end to PC-end ..................6 2.3.2 PC-end to the Device-end ................ -
Page 6: General Introduction
1 General Introduction 1.1 Overview This series network camera integrates the traditional camera and network video technology. It adopts audio and video data collection, transmission together. It can connect to the network directly without any auxiliary device. This series network camera product uses standard H.264 video compression technology and PCM， G.711a audio compression technology, which maximally guarantee the audio and video quality. -
Page 7: Specifications
The enclosure conforms to the IP 66 protection. Has the waterproof function. 1.3 Specifications 1.3.1 Performance Please refer to the following sheet for network camera performance specification. Model IPC-HFW5100C IPC-HFW5200C Parameter Main Processor High performance DSP Embedded LINUX System... - Page 8 Privacy Mask Supports max 4 privacy mask zones Video Setup Support parameter setup such as bright, contrast. Video Channel title, time title, motion detect, camera masking. Information Lens Manual zoom 2.8-12 mm@F1.4 Manual zoom 3.3-12 mm@F1.4 Φ14 interface. Lens is the default accessories Lens Interface 1-channel.
-
Page 9: Structure
2 Structure 2.1 Multiple-function Combination Cable You can refer to the following figure for multiple-function combination cable information. See Figure Figure 2-1 Multiple-function combination cable Please refer to the following sheet for detailed information. Port Name Function Connection Note DC 12V/AC Power input Power port. -
Page 10: Framework And Dimension
Port Name Name Note ALARM_COM Alarm output public port. Alarm output port. It is to output the alarm signal to the alarm device. ALARM_NO NO: normal open alarm output port. It works with the ALARM_COM port. I/O Port Alarm input port 1. It is to receive the on-off signal ALARM_IN1 from the external alarm source. -
Page 11: Bidirectional Talk
Figure 2-3 Dimension illustration 2 2.3 Bidirectional talk 2.3.1 Device-end to PC-end Device Connection Please connect the speaker or the MIC to the audio input port of the device. Then connect the earphone to the audio output port of the PC. Login the Web and then click the Audio button to enable the bidirectional talk function. - Page 12 3) Open the Web, go to the Figure 2-4. Please set the alarm input 01 port for the first channel of the I/O cable (No.3 pin). The alarm input 02 is for the 2 channel of I/O cable (No.4 pin). Then you can select the corresponding type (NO/NC.) 4) Set the WEB alarm output.
- Page 13 Figure 2-6 Alarm output...
-
Page 14: Installation
3 Installation Please note all frame and dimension illustrations provided in this chapter are for reference only, and actual product may vary. 3.1 Device Installation Please refer to Figure 3-1 for installation information according to the actual product. Please follow the steps listed below to install the device. -
Page 15: Lens Adjustment
Figure 3-2 Micro SD card installation 3.3 Lens Adjustment Turn counter clockwise to remove the lens cover, now you can see the iris front and rear control rod. The front control rod is to focus and the rear control rod is to zoom. See Figure 3-3. Please turn clockwise to fix the lens cover back firmly. -
Page 16: Bracket Adjustment
3.4 Bracket Adjustment You can use an M4 inner hex screw to control the bracket. Please use the inner hex wrench from the installation accessories bag to unfasten the screw. Please refer to Figure 3-4 according to the actual product. The horizontal angle of the rear cover can rotate 360° , the tilt angle can rotate 90° and the chassis can rotate 360°... -
Page 17: Quick Configuration Tool
4 Quick Configuration Tool 4.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 4.2 Operation Double click the “ConfigTools.exe”... - Page 18 In the configuration tool search interface (Figure 4-1), please select a device IP address and then double click it to open the login interface. Or you can select an IP address and then click the Login button to go to the login interface. See Figure 4-3. In Figure 4-3, you can view device IP address, user name, password and port.
-
Page 19: Web Operation
5 Web Operation This series network camera products support the Web access and management via PC. Web includes several modules: Monitor channel preview, system configuration, alarm and etc. 5.1 Network Connection Please follow the steps listed below for network connection. ... - Page 20 Figure 5- 2 Web login If it is your first time to log in, system pops up warning information to ask you whether install web plug- in or not after you logged in for one minute. For detailed plug-in installation, please refer to the Web Operation Manual included in the resource CD.
- Page 21 Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction.
-
Page 22: Faq
6 FAQ I can not boot up Please click RESET button for at least five seconds to restore the device. factory default setup. Micro card Do not set the Micro SD card as the storage media to storage the write times schedule record file. -
Page 23: Appendix Toxic Or Hazardous Materials Or Elements
7 Appendix Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE Circuit Board ○ ○ ○ ○ ○ ○ Component ○ ○ ○ ○ ○ ○ Case ○ ○ ○ ○ ○ ○...
Need help?
Do you have a question about the IPC-HFW5100C and is the answer not in the manual?
Questions and answers