Table of Contents
Advertisement
Step 3
Select "Preset" and the camera will quickly move to the corresponding position of the preset.
Note
It needs to implement the step when it is to set the intelligent rules of tracking speed dome.
Step 4
It is to configure the rule of abandoned object.
1. Click , double click the new rule, set rule name, and select rule type as "Abandoned Object", which
is shown in Figure 4-67.
2. Click "Draw Rule" to draw rules on the monitoring image, right click to end drawing;
Note
It can also trigger alarm if a pedestrian or vehicle stays a longer time than the set value. In order
to filter this kind of alarm, generally the abandoned object shall be smaller than both person and
vehicle, the max size of filter target is recommended to be smaller than people and vehicles.
Figure 4-67
Advertisement
Table of Contents
