Message List; Receive A Text Message; Receive A Text Message During A Call; Read A Stored Text Message - ASCOM 9d24 MkllMessenger User Manual

User Manual
9d24 Mkll Cordless Telephone
3.2.1

Message List

Up to twenty messages can be stored in the message list, if the total number of characters
does not exceed 6000. Use the navigation key (up) to enter the message list.
3.2.2

Receive a Text Message

The flashing LED, accompanied by a message tone and/or a vibrating telephone, gives you
notice of a message. The message tone can be silenced by a press on the Mute button.
The message tone will break trough silent mode if the message is urgent. The message is
shown on the display. The size of the text can be changed, see
page 33. The text can also be displayed upside down, see
Displayed Upside down
By pressing any key (not alarm, mute and volume buttons) the received message is marked
as read.
Delete the received message
Press the Soft key "Delete" when the message is viewed on the display or marked in the
Message list. The question "Delete message?" is shown; press "Yes".
3.2.3

Receive a Text Message during a Call

During a connected call a new message is indicated by a beep. The characteristics of the
beep is the same as the message tone.
Depending on parameter settings in the handset, an urgent message can be permitted to
disconnect the call.
3.2.4

Read a Stored Text Message

Open the message list by pressing Navigation key (up), or from the menu, see
6.1 Messages
message is highlighted. Press Navigation key (right) to read the message. If the clock and
date function is set, you can on the same day the message was received, see the time for
the message. The time stamp is changed to a date stamp the following day.
3.2.5

Delete a Stored Text Message

Open the message list by pressing Navigation key (up), or from the menu, see
6.1 Messages
message is highlighted. Press "Delete". The question "Delete message?" is shown; press
"Yes".
3.2.6

Receive a Message with Request for Answer

A message with request for answer is indicated and viewed the same way as an ordinary
message, see
added to the message. Use the Soft keys to do a positive or negative acknowledgement.
Accept/Reject the message
Press the Soft key "Accept" or "Reject". In the message list an acknowledged message is
indicated by the text "Accepted" or "Rejected".
Note: The option "Delete" is not available for a message with request for answer. An
unacknowledged message can only be deleted from the message list.
2006-03-20/ Ver. PA8
PRELIMINARY
on page 34.
on page 25. Navigate in the list with Navigation key (up/down). The selected
on page 25. Navigate in the list with Navigation key (up/down). The selected
3.2.2 Receive a Text Message
6.5.11 Change Text Size
6.5.17 Set New Messages to be
on page 13, but the text "Acknowledge" is
TD 92333GB
on
13