Turning Your Phone On; Turning Your Phone Off; Placing A Call; Basic Operations - ASCOM 9P23 User Manual

Basic Operations

Turning Your Phone On

Press and hold
on
The display
and keypad
backlighting
come on for
about 30
seconds.
The display
should look similar to this illustration.
The system icon will be steady when the
phone is locked to the system. This
display represents Standby mode.

Turning Your Phone Off

Press and hold
off
and the display goes blank.

Placing A Call

To place a call, the phone must be O N
and locked to a system.
1. Enter the phone number you wish to
call by pressing the numeric keys.
The number is shown in the
display.
If you
enter a
wrong
digit,
press up
scroll key to erase the digit.
2. Press
on
3. When you finish your conversation,
press to end the call.
off
Answering a Call
When your phone receives a call, the ring
melody sounds (unless you have disabled it
through the Sound Setup menu, see page
28) and the
indicator
light on top
of the phone
rapidly
flashes red.
Basic Operations
until your phone beeps.
until your phone beeps
1. Press to answer the
on
call.
2. When you finish your conversation,
press
off
Increasing or Decreasing
Speaker Volume During a
Call
To adjust the speaker volume during a call,
press the side keys on the phone. Once
the call is finished, the volume will return
to its' menu setting.

Reading a Message

When your phone receives a message, the
ring melody sounds.
Press Read to read the message.
1.
2. When you finish reading, press
Close.
Temporarily Muting the Ring
Tone/Warning Beeps
To temporarily mute the ring tone
without answering the call, press Decline.
You can still answer the call by subse-
quently pressing Accept.
To temporarily mute the warning beeps,
press the Mute button.
Redialing the Last Number
You Called
Your telephone stores the last 20 numbers
dialed. To view this list in the display,
press Up Arrow twice to enter the Redial
list. You can redial the number by pressing
.
on
If the list is empty, the phone will beep.
14
to end the call.