Installation Of Isc40G(S)-Tg With T-Piece - YOKOGAWA ISC40G(S) User Manual

16
3.1.2 Installation of ISC40G(S)-TG
with T-piece
The ISC40G(S)-TG sensor is a PFA sensor
which can be used in combination with a
T-piece of which the innerside is lined with
PFA. This can be done using option /TFD
(sealing material with stainless steel DN65
PN10 flange), or by option /TFN (sealing
material) if the stainless steel flange DN65
PN10 is already available. Both options are
available as sparepart.
Note: If sensor is replaced, you have to
use new sealing materials (part
no. K1541XG) to prevent process
leakage.
T-piece:
Partno. Flanges
K1500HG DN80 PN10
K1500HF DN100 PN10
Innerside of T-Piece is lined with PFA
Thickness: 4mm. Flange material: SS316
Fig 9: T-piece dimensions
IM 12D08J02-E-E
C
DN65 PN10
300.0
ISC40.-TG/TFD
Fig 8: Flange adapters
(option /TFD, /TFN) for –TG sensor
in combination with T-piece
Description
T-piece, DN80 flange
T-piece, DN100 flange
Mounting flange and bolts are included
øB øA
DN65 PN10
DN80 PN10
DN100 PN10
SS304 Nut
DN65 PN10 flange
TFM ring
O-ring 29.74 x 3.53
Goretex seal
ø100 (3.94")
PN10 + TFM ring = TFD
TFM ring alone = TFN
A B C
185 145 4x ø18
200 160 8x ø18
220 180 8x ø18