Dimensions Isc40Fd - YOKOGAWA ISC40G(S) User Manual

32
Alternative ways of mounting the immersion fitting are:
• Guide pipe
To facilitate this type of mounting the immersion fitting has a larger diameter at the top.
The user supplied guide pipe (internal diameter > 52 mm) is fitted to the wall or mounting
rail. The immersion fitting slides into this guide pipe and therefore the sensor can be easily
removed for inspection.
• Platform mounting
Sometimes there is a walking platform that can be used to mount the immersion fitting.
The top of the immersion fitting has a larger diameter than the shaft. The only thing to do
is to drill a precise hole in the platform to slide the fitting through.

11.3 Dimensions ISC40FD

Dimensions in mm (inches)
ø60 (2.5)
ø50 (2)
L* see modelcode for available insertion
lengths
Fig 25: Immersion fitting ISC40FD
IM 12D08J02-E-E
ø51 (2)
Transmitter side
Fitting side
Fig 26: Protection hose,
option /PH5, /PH10
Locknut
Sealing
Sealing